A distributing mechanism is arranged on the floating die frame, and its distributing action is driven by a hydraulic cylinder,
and the product will be pushed out of the mold cavity while distributing.
The whole hydraulic control system is composed of high pressure pump and control components, and is connected to the main engine through high pres-sure tubing.
In order to ensure the compactness of the products,we adopt the structure type of floating die frame.
The processing pressure is large, and two-way floating pressurization is adopted.
The hydraulic press can be equipped with explosion-proof motor, which can be used in flammable and explosive places.
The explosion-proof motor does not produce electrical sparks when it runs, and the junction box is sealed better than the ordinary motor, and the safety degree is higher.
| 63T-a | ||
| Nominal pressure(KN) | 630 | |
| System pressure (Mpa) | 20 | |
| Maximum slider opening(mm) | ||
| Effective stroke of slider(mm) | 650 | |
| Effective size of table(mm) | Right and left(mm) | 850 |
| Front and back(mm) | 670 | |
| The slider velocity(mm/'s ) | Under the fast(mm/s) | 30-200 |
| Work into(mm/s) | 4-24 | |
| Back tracking(mm/s) | 50-200 | |
| Floating die stroke (mm) | 400 | |
| Bunker stroke (mm) | ||
| Rising speed of floating die (mm/s) | 20-100 | |
| Down speed of floating die (mm/s) | ||
| Floating die speed (mm/s) | 20-90 | |
| Release force of floating die holder (T) | 18T | |
| Distribution cylinder stroke(mm) | 370 | |
| Distributing cylinder distributing speed (mm/s) | 50-300 | |
| Motor power (KW) | 8.9(servo) | |
| Plunger Pump(L) | ||
| Lower cylinder top output (KN) | ||
| Lower cylinder ejector stroke (mm) | ||
A distributing mechanism is arranged on the floating die frame, and its distributing action is driven by a hydraulic cylinder,
and the product will be pushed out of the mold cavity while distributing.
The whole hydraulic control system is composed of high pressure pump and control components, and is connected to the main engine through high pres-sure tubing.
In order to ensure the compactness of the products,we adopt the structure type of floating die frame.
The processing pressure is large, and two-way floating pressurization is adopted.
The hydraulic press can be equipped with explosion-proof motor, which can be used in flammable and explosive places.
The explosion-proof motor does not produce electrical sparks when it runs, and the junction box is sealed better than the ordinary motor, and the safety degree is higher.
| 63T-a | ||
| Nominal pressure(KN) | 630 | |
| System pressure (Mpa) | 20 | |
| Maximum slider opening(mm) | ||
| Effective stroke of slider(mm) | 650 | |
| Effective size of table(mm) | Right and left(mm) | 850 |
| Front and back(mm) | 670 | |
| The slider velocity(mm/'s ) | Under the fast(mm/s) | 30-200 |
| Work into(mm/s) | 4-24 | |
| Back tracking(mm/s) | 50-200 | |
| Floating die stroke (mm) | 400 | |
| Bunker stroke (mm) | ||
| Rising speed of floating die (mm/s) | 20-100 | |
| Down speed of floating die (mm/s) | ||
| Floating die speed (mm/s) | 20-90 | |
| Release force of floating die holder (T) | 18T | |
| Distribution cylinder stroke(mm) | 370 | |
| Distributing cylinder distributing speed (mm/s) | 50-300 | |
| Motor power (KW) | 8.9(servo) | |
| Plunger Pump(L) | ||
| Lower cylinder top output (KN) | ||
| Lower cylinder ejector stroke (mm) | ||
