The column is made of 45# steel and the surface is plated with hard chrome. The four-column guide bush is made of wear-res is tan material and the thin oil centralized lubrication system is used
to reduce friction resistance and avoid scratches and strains on the column.
Servo motor:
Very fast control speed, high starting torque, high operating efficiency, low operating temperature, low noise, very little electromagnetic radiation, and long service life
Schneider is selected for electrical appliances, which are safe and reliable. The circuit lines of the switchboard are clear. The electrical schematic diagram is provided when the goods are delivered.
The two-way plug-in valve controls the flow direction and pressure of hydraulic oil, reduces leakage points, and operates reliably and with stable pressure.
Hydraulic Locking Device
Grating Protecting Paused
Pull Pope Displacement Sensor
Measuring and displaying distance.
High-Pressure Rubber Oil Pipe
Hydraulic presses using high-pressure rubber oil pipes are more durable and corrosion-resistant than hydraulic presses using steel pipes.
| 630T | ||
| Nominal pressure(kN) | 6300 | |
| System pressure(Mpa) | 25 | |
| Maximum slider opening(mm) | 1900 | |
| Effective stroke of slider(mm) | 1450 | |
| Effective size of table(mm) | Left and Right(mm) | 3200 |
| Front and back(mm) | 2200 | |
| The slider velocity(mm/'s ) | Under the fast(mm/s) | 100-300HMI adjusted |
| Feeding(mm/s) | 4-20HMI adjusted | |
| Back tracking(mm/s) | 50-260HMI adjusted | |
| Hydraulic pad top power(T) | 200T | |
| Hydraulic pad ejection stroke(mm) | 450 | |
| Maximum center distance of hydraulic pad ejector rod(mm) | ||
| Hydraulic pad ejection speed(mm/s) | 15-60HMI adjusted | |
| Motor power(KW) | 48*2(servo) | |
| Internal gear pump/piston pump(L) | ||
| Punching cylinder (KN) | ||
| Cylinder stroke(mm) | ||
The column is made of 45# steel and the surface is plated with hard chrome. The four-column guide bush is made of wear-res is tan material and the thin oil centralized lubrication system is used
to reduce friction resistance and avoid scratches and strains on the column.
Servo motor:
Very fast control speed, high starting torque, high operating efficiency, low operating temperature, low noise, very little electromagnetic radiation, and long service life
Schneider is selected for electrical appliances, which are safe and reliable. The circuit lines of the switchboard are clear. The electrical schematic diagram is provided when the goods are delivered.
The two-way plug-in valve controls the flow direction and pressure of hydraulic oil, reduces leakage points, and operates reliably and with stable pressure.
Hydraulic Locking Device
Grating Protecting Paused
Pull Pope Displacement Sensor
Measuring and displaying distance.
High-Pressure Rubber Oil Pipe
Hydraulic presses using high-pressure rubber oil pipes are more durable and corrosion-resistant than hydraulic presses using steel pipes.
| 630T | ||
| Nominal pressure(kN) | 6300 | |
| System pressure(Mpa) | 25 | |
| Maximum slider opening(mm) | 1900 | |
| Effective stroke of slider(mm) | 1450 | |
| Effective size of table(mm) | Left and Right(mm) | 3200 |
| Front and back(mm) | 2200 | |
| The slider velocity(mm/'s ) | Under the fast(mm/s) | 100-300HMI adjusted |
| Feeding(mm/s) | 4-20HMI adjusted | |
| Back tracking(mm/s) | 50-260HMI adjusted | |
| Hydraulic pad top power(T) | 200T | |
| Hydraulic pad ejection stroke(mm) | 450 | |
| Maximum center distance of hydraulic pad ejector rod(mm) | ||
| Hydraulic pad ejection speed(mm/s) | 15-60HMI adjusted | |
| Motor power(KW) | 48*2(servo) | |
| Internal gear pump/piston pump(L) | ||
| Punching cylinder (KN) | ||
| Cylinder stroke(mm) | ||
