Customized 40 tons Hydraulic Press Machine With High Quality Deep Drawing Hydraulic

Uses and features of Y41 series single-arm hydraulic press:    

This series of machine tools can be used for shaft and similar verification processes, stamping and assembly of shafts and sleeves, as well as stretching, forming and blanking of simple formats. It is suitable for plastic products, machine tools, internal combustion engines, textile machinery, shafts, bearings, washing machines, automobile motors, air-conditioning motors, electrical appliances, military enterprises and foreign-funded enterprises assembly lines and other industries. This series of machine tools adopts pedal linkage and is easy to operate. The hydraulic machine is equipped with electro-hydraulic reversing valve or cartridge valve. It has the characteristics of compact structure, safety and reliability, sensitive action, fast speed, low energy consumption and low noise. The body of this series of machines is a C-shaped single-arm structure, which is welded by CO2 of all steel plates, and tempered after welding to ensure that the body does not deform. The hydraulic system is located in the body, which is beautiful in appearance and easy to operate. This machine has an independent power mechanism and electrical system, and is centrally controlled by buttons. The working pressure and pressing stroke range of this machine can be adjusted according to the working needs.

This machine is composed of two parts, the main engine and the control mechanism, which are connected by the main pipeline and the electrical device to form a whole. The main engine includes the fuselage and the main oil cylinder. The structure and functions of each part are introduced as follows: The fuselage is a C-shaped single-arm structure, and the wall panels on both sides, the waist plate and the ribs are welded to form a rigid truss. The oil cylinder and the workbench are connected with the fuselage through bolts, and there is a blanking hole in the center of the workbench. The pressure head is connected with the piston rod by thread. The main oil cylinder is a double-acting piston oil cylinder, and the bottom of the cylinder is a closed-end integral structure. A piston head is installed in the cylinder body. On the outer ring of the piston head, there is an upward and a downward imported UN-shaped sealing ring and the cylinder wall. Sealing; so that two upper and lower oil chambers are formed in the cylinder. A guide sleeve is installed at the cylinder mouth to ensure good guiding performance when the piston moves. Two UN-shaped sealing rings are installed in the inner hole of the guide sleeve, and an O-shaped sealing ring is installed on the outer circle of the guide sleeve to ensure the sealing performance of the cylinder mouth. The cylinder mouth is connected by bolts, and a dust-proof ring is installed at the end to prevent dirt from entering the cylinder and keep the oil clean. The power mechanism is provided by the fuel tank. Composed of high-pressure oil pump, electric motor, integrated valve block, etc. It is a mechanism that generates and distributes working oil so that the main engine can complete various predetermined actions.

1. The single-arm hydraulic press is mainly used for the calibration and press-fitting of shaft sleeve parts, and can also be used for other processing purposes. 2. The vertical layout of the single-arm hydraulic press, the equipment components are all inside the machine body, and the appearance is neat and beautiful. 3. Single-arm hydraulic press can be used for handle and pedal operation. The pressure of the equipment can be adjusted within the specified range. The stroke size can be controlled and the operation is relatively simple.

1. The solid open structure welded as a whole of the single-arm hydraulic press can keep the fuselage sufficiently rigid and have a convenient operating space. 2. The single-arm hydraulic press has the characteristics of good structural rigidity, good guiding performance and fast speed. 3. The convenient manual adjustment mechanism of the single-arm hydraulic press can adjust the pressing head or the upper worktable to press at any position in the stroke, and can also adjust the length of fast forward and working stroke arbitrarily within the designed stroke.

Packaging according to your requirements to ensure the stability and safety of the product during transportation

Package and shipping:

1.The four column metal stamping press machine surface with anti-rust treatment,

2.The four column metal stamping press machine inner layer of plastic waterproof packaging,

3.The four column metal stamping press machine outer layer of thick wood or steel frame fixed,And then use a synthetic board package. Combined container transport, or separate container transport.